Security Forensics and Risk Management

Security Forensics and Risk Management Acknowledgement Foremost I would like say thanks to god for all support in all my life and secondly University of Greenwich to give this my life aim to complete my masters. Next my supervisor Professor Kevin Parrott to the supports he gave because without his support I wouldnt be able to complete my project with this quality. Especially the suggestions and appreciation given my supervisor make me feel better and gave positive thinking. Finally need to thank my family and friends for unbelievable supports and encouragements. Abstract As we are in the information era the world is changing to use electronic means for day to day use. The paper documents is gone and most of them are paper free because of so many reasons such as pollution, easy, fast, etc At the same time this digital media has availability, scalability, confidentiality and integrity which are required behaviour for secure communication. The risk is increased with the increase of computer and digital means usage and the single security lack may cause huge losses. There are some surveys says most of the crimes are happening through electronic means and the target is computer or computer peripherals. If the attacker found a single security lack that is enough to start and break the whole system and the security lack could be configuration mistake, firewall issue and basically problems in the protection mechanism. Because of these reasons testing become very important and this process called as Auditing. There are so many types in the auditing and this auditing requires technical knowledge to make these tests perfect and to give an audit report including suggestions. The auditing falls into two main categories such as Automatic and manual. The test will be efficient if it is automated using testing tools which are called as automated or computerised test. Even though there are some tests cannot be automated and need to test manually. This auditing covers network security test, physical or environment security test, computer security test which includes software and hardware tests. The computerised test will carry on with some security tools and the manual will use questioner to minimise human made errors mainly forgetting.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Security audit is the technical assessment of the application or system. The assessment may be manual or systematic or both. In most case the auditing process uses manual and systematic/ automatic methods because there are some tests cannot be automatic such as review of the security policy, asset management, etc   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  This auditing has different types such as internal or external. This type is depends on the company size and the resource availability. Usually big companies have their own security auditor so they will perform the audit internally and the small and medium size companies mostly hire auditor form outside. Both types got pros and cons in security and financial manor. Chapter 1 Introduction This chapter largely contains non-technical information to give the understanding of high level objectives. Also describe the techniques and technologies used in the project and research to accomplish the project Objective Audit The audit is a systematic or manual security assessment of the network, infrastructure, system, etc The complete audit should be the combination of manual and automatic assessment because in every test target there will be some test cannot be automatic. The audit has so many categories and the following paragraph will explain about the categories and the functions or techniques behind that. There are 3 controls in the auditing process which are Preventive control The preventive controls are controls may in the form of software or hardware or ant configuration to prevent the error or vulnerabilities. This is an active type control always monitor the interface for any vulnerabilities and block such vulnerabilities or errors before it enter into the system or infrastructure. This is most effective control mechanism because not allows the vulnerabilities. Detective control The detectives are in placed to monitor the vulnerabilities in the form of software or hardware but the different between preventive and detective is the preventive wont allow the vulnerabilities into the system where detective allows entering everything and correcting the vulnerabilities after enter. The best example is for this control is fire alarm because fire alarm wont prevent the fire before but if any fire it will work. Corrective controls The corrective controls are the controls to correct the error or issue before it make any harm. This is very important control for all places even if they have other controls because there are some issues or vulnerabilities cannot detect by the controls if they will come and attack so there should be some control to correct those before loss occur. Addition to that the controls should up to date such as latest firmware or latest definition. Type of auditors   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  There are two basic types of auditors in the information era the internal and external auditors. This selection of the auditor will be done by the management with the use of financial status of the organisation. Size of the organisation and the policies defined in the company. Internal auditors Internal auditors are auditors belong to that particular company which is going to perform the audit. That means the auditor is an employee of the company. So the auditor is always available to do the auditing and data or information will keep within the organisation. This is the main advantage of having the internal auditor and the same time and the employee purposely recruited for auditing then is cost a lot for the company. So it is only possible for the big level companies because they have huge investments and revenue. The disadvantage of the internal auditor is they may be up-to-date and dont have current market or audit status such as new techniques and tools. External auditors The auditor recruited from other auditing firm for the auditing so it is very hard to find professional auditor because of the availability and as the auditor recruited from outside the company information may go out. At the same time the auditor needs some time to get and understand the company process. But the advantage of recruiting the external auditor is their knowledge and it is suitable for middle and small level companies. Types of Audit: Traditional Audit It is just like a manual auditing. It is useful when working with a large amount of data in a large company. Here auditor took some sample data from different place then provide a report. Advantage: Easy Cheaper Disadvantage: Always do not provide correct information. In IT sector it is not useful. Software audit: Software audit is a wide popular for any educational institute or organization. It is just like a review of the software and the system that can find all information of the system such as operating system, application software, processor, drives, controllers, bus adapters, multimedia, virus protection, system model, main circuit board, memory models, local drive volumes, network drives, printers information etc.. There are so many auditing tools in the market such as Belarc Advisor, E-Z audit that are very power full. KW116 is the main Lab for school of computing and mathematical science in University of Greenwich. CMS installed lots of software for students to continue study or research. According to Copy right, Design and Patents Act 1988, all Software must have a valid licences to continue the process. As Lab uses large amount of software and different software expire on different time so it is very difficult for Lab administrator to keep up to date all licence by manually checks. Only auditing by software can possible to give details report to administrator to keep up safe the system. Advantages: Correct Information: Machine always provide the correct information so it has less chance to provide the incorrect information. Save time: Software very quickly provides a report of the system so it saves time. Details description: It provide a details description of system including any warning or licences issues etc Minimise the cost: By implementing the software audit two peoples work may possible with one people so it reduce the extra cost. Disadvantages: Investment Costly: Software is very expensive so university need extra money to buy this software. Risk: Auditor knows the details information of the system. Work flow: Auditor needs part of the lab to check the system. So it discontinues the student workflow. The approach The typical audit has different approach to collect the data. The single audit will use multiple techniques to gather full information and it is necessary to use different technique for different level of people. These are common techniques here. Interview This technique uses to collect the information from outside people or top level people and the number should be limited. During the interview the auditor or interviewer will ask questions from other people and collect the information. So the person will be well prepared for the interview. This is very robust method because it will allow people to express fully and the method also simple as it is talking which is natural way to communicate. Another advantage is this bi directional communication, means both parties allows to ask questions for clarification or gather information. Observation This method uses in the place where real time process monitoring or behavioural change is required. This is a powerful way of do the changes throughout the audit because other techniques exist in currently not possible to get real time information. Inspection The technique required to do some action with collected data to collect audit related information. This is the form of observation with advance criteria expected. This is extended version of observation because if the auditor apply any advance criteria to gather the data which is necessary to the auditing. After collecting the data the next step is to identify the weakness and process it. The identifying is the key work in the audit and after that categorising. The identifying uses some techniques to make that easy, preface and professional. The techniques used here are Root cause analysis General technique for analyse and get the better solution for the vulnerability or weakness. Because this technique drilldowns to the issue and finds the root and fix the weakness. The basic technique behind this is if the root is fixed automatically it will fix all other problems related to that. So simply close all related issues at once. As mention the easy and robust way to stop the issues exist and the issues may come in the future. After root cause analysis the next step is to get the solution for the root of the issue. The important thing here is choosing better and effective solution for the issue. The selection depends on some external and internal restrictions. Organisation policy Cost per benefit Legal restrictions Availability Compatibility Vendor and citification Advantage of having Auditing: Satisfaction: It brings the confidence of the Lab administrator of the University of Greenwich to continue the business process. Owner always thinks is there any lack that breaks down the continuity of the business. Detection and prevention of errors: Human can made error in any times .on one can say there is no error in there company. By auditing people can find the error and suggestion to recover the error. Detection and prevention of fraud: It also just likes errors. Sometimes user intentionally or unintentionally does this thing. So after audit we can find out the fraud. Verification of the Licences: KW116 Lab installs lots of software for student. Here some software for 1 year some software for more than one year and some software has limitation (No. Of user can use) for use. So auditor can find all kind of licence issues. Independent opinion: Audit always done by the independent people .so this report always accepted by everyone. Safety form exploitation: Health and safety always is a big issue for any organization. KW116 Lab got lots of equipment that are connected with electricity. So always chances for short circuit or exploitation. Audit identifies the all lack point and advice for prevention. Disadvantage of having Auditing: It is expensive Sometimes slow or stop the work flow External people know the company information. Encryption Encryption is the simple technique in the different for to send the date securely through shared place like internet. The form of encryption may vary from each other but they all commonly use digital certificate to encrypt and decrypt the data. Encryption use keys to make cipher text from actual message. The cipher text is not readable and it is the encrypted version of the massage using some algorithm. Security roles/user roles The security roles are very important technique to make network administration easy. This is basically creating some groups with different permissions according to the organisation operation or policy. A user or staff can have multiple security roles according to their need. This roles use to authorise the user permission. Security policy Security policy is a document which has all rules and regulations documented and approved by management and align with laws and legislation. This policy is used to define all activities and this is used to make some decision. Business Continuity: There are three things always we have to mind to continue the business Essential: to running the business any customer order cannot be delay more than seven days. Tolerate delay: some application may delay to continue the business such as management pay. It is a midterm i.e. one to four weeks. Discretionary: some application is useful for business but it is not affected to continue the business operation such as management report. It is a long term i.e. 3 to 6 months. Business continuity planning Business continuity planning (BCP) is the most important for any organization to continue the business. BCP engages with only different kind of risk to continue the business process that might occur in the organization and it also creates the policies, plan and procedures to reduce the risk. BCP can continue the business process in disaster situation as well. The main goal of the BCP is to combine together all policies, procedures and process so that any disruptive situation business process can continue or it may impact very little. Here main important function of BCP is Maintaining the business operation Continue the business in emergency situation Reduce the risk If any situation BCP cannot take over then Disaster recovery planning (DRP) takes over. British Auditing Standard BS7799: It is a British standard called as BS7799 that developed by British standard institution where describes the security policy and standard procedures.BS7799 become the ISO IEC 17799 after accepting the ISO IEC technical committee for international use. Now a days information is a valuable asset for organization .So it is very important to protect the information like other corporate asset. Here BS7799 introduces how to protect the information from threats and suggest the three points to secure the information such as Integrity: it is assurance the completeness and accuracy of the information. Confidentiality: Information can only access by the authorise people Availability: Authorise people can access the information when needed. Attacks and prevention for the attacks Errors and Omissions: Errors and Omission is one of the most common and toughest vulnerabilities .It is a human made error because human interact with programming, controlling and enter data for computer. There are no countermeasures to protect the errors and omission. Fraud and theft: It is a one kind of criminal activities that may occur in the KW116 Lab. It includes computer component such as mouse, keyboard, router, switch, cables, CPU box etc. It was observed that security person always not in the access point. So it is harm to secure the lab from fraud and theft. By protecting the access control we can reduce the fraud and theft. Both internal and external people are responsible for that kind of activities. Prevention of Fraud and theft: Regular auditing and monitoring program will help to identify all kind of fraud and theft. Deploy all of the access control. CCTV in proper place. Virus: Virus is a malicious code that has ability to reproduce his code itself and spread one system to another system via e-mail, downloading, storage devices (CD, DVD, memory stick, removal hard drive) and destroy the computer system. It was observed that removal memory stick all most every user are using and it is the most change to spread the virus in the Lab computer system and also observed user are using their own laptop and connected to the university wireless network. If user laptop effected with virus then it also change to spread the lab network that can affect the internal network and attack the server and crash the hard drive. Prevention: Install the latest antivirus software. Regular update the antivirus software. Follow the backup procedures regularly. Scan the device when transfer data. Installing the NIDS (Network Intrusion detection system) and firewall Minimise the download from internet. Download only repudiated site web site. Scan before the download. Care full to open unknown e-mail attach. Scan all incoming file from the remote site. Aware the user about danger of the virus. Trap-doors: It is an undocumented command that might user can create to speed up the work flow. Unfortunately sometimes student might leave these trap-doors. Prevention of Trap-doors: Use latest antivirus software. Give permission to develop the code only authorise people. Check properly all coding before use it. Logic bombs: It work s like time bombs and affect the system in a particular event or day such as program launch, website logon. It changes the data and deletes the data from the system. Here student are accessing the lots software to do the course work or project. So they are strong enough to build the logic bombs. It is normally happen in company if employee leaves the job. Prevention: Audit regularly and monitoring Always back up the necessary file Allow authorise people to develop the code Need record of all modification or changes Trojan Horses: It is a software programming that contains the malicious code. Normally students are interested to download the music, free software from internet. It is the most change to affect the lab computer and destroy the data stored on lab computer system. Prevention: Avoid unwanted software and music download from internet. Aware the user about Trojan Horses. Worm: Warm also is a malicious code that can spread itself without any human involvement from one system to another system .It works only computer network system and does not need any devices to transport. Prevention: Use firewall Use update antivirus software Spyware: It is an unwanted software interface that monitors the activity of the user and transfers the important information like log in details or account details to the remote system that monitor the user activities. Adware: It is also similar to spyware but it does not intent to transfer the user details to a remote system. It works like advertisements on the internet. Some adware monitor the searching behaviour of the user and then redirect the related websites. Prevention of Adware /Spyware: Close the pop up window. Aware about the spyware/adware. Click only reputed link. Social Engineering: Most of the users are getting unknown mail and they are also chatting with unknown people. Social engineering is one of the most popular techniques that attackers use to access the system by sending the mail or chatting with people to know the password. So it is a major risk to the security of the password. Prevention: Not response the unknown mail. Not chatting with unknown people. Dont give any one personal information or login id. Proper training or aware the new user about social engineering. Ping of death: we have only permission to send the largest packet (65,536 bytes) on the server. Attackers know this amount of bytes from ICMP specification. So they try to send the packets more than 65,536 bytes (at least 65,537). If the server does not check the size of the packet and try to process then it hung or crashed the operating system. Dumpster diving: Every day Lab user printing there necessary document but sometimes by mistake they are printing unnecessary document and end of the day through all document in the bin. Hacker is very intelligence. They always look at the bin and find the necessary document to access the network. Prevention: Destroy all documents before put in a bin Natural disasters: If anything happen that is not under control of human it is called natural dusters such as earthquakes, volcano, floods, fires, storms, hurricanes etc It may occur in any time but most risk is the fire for KW116 lab. It may cause from heater, power supply, over heating the power box, short circuit etc. Natural disaster is less chance for lab but it affect is more than any threat .It may destroy the part of the building, loses the all information. Prevention: Follow the health and safety procedures. Clear the fire exit. Aware the user about possible disaster. Man-Made Disasters: If anything happen intentionally to destroy the business process or destroy the part of the business and it is control of human then it is called the Man-Made Disaster such as Fire, Act of Terrorism, Bombings/Explosions, and Power Outages etc. Prevention: Check always ID card Allow only authorise people Use metal detector CCTV Equipment failure: Students are always busy with their course work and other course related work so equipment failure may loss the all data. Prevention: Use extra UPS Back up all data Auditing Stages/Steps Scope and Pre-Audit survey Planning Field work Analysis Reporting Scope and Pre-Auditing The first step or stage of the audit is to understand the purpose of the audit and the areas need to cover during the audit. Understanding the audit purpose is basically get the idea why this audit needs to perform; means any special risk assessment or annual audit. If it is special risk assessment audit this will be more specific and the scope will be narrow and deep otherwise if it is annual audit it will be the general audit to cover as much as possible area. Pre-Auditing survey is to verify the audit areas using risk management techniques and some general techniques such are reading previous audit report, web browsing, background reading, etc This will reduce the chance of failure by correcting the plan by lesson learned. Planning and Preparation In this stage the scope is going to break into small areas to make auditing easier and clear. So the clarity will be more and purpose will be easy to understand. Usually this stage will involve the work breakdown plan and risk control matrix. The risk control matrix is just a check list contains questions to carry out during the audit. Field work Actual auditing will perform during this stage by different techniques or methods. Simply it starts with interviewing staff or students using questioner or oral interview to system or network test by auditing software tools. The result of this stage will be the evidence of the audit to get a conclusion or submit to the management with audit report. So this will be the most important stage in the audit process. This step may use several testing software tools depend on the scope of the audit and the software selection is another key event of the audit process because there are so many fake software applications available in the market. Actually those are virus and the reason of making virus in the form of auditing tools. The reason of spreading the virus in the form of auditing or testing tool is very easy and hart to detect. Analysis Using the evidences or any results collected in the previous stage are the input of this stage. This stage is fully analysis and decision making so it needs a lots of time to investigation and assessment. The most sensitive area of the audit process is analysis because this is the place going to take the decision to submit to the board so that should be perfect otherwise the audit is useless and it will lead to make some wrong decision. Reporting The stage is to present all audit findings in the form of report. This is the document contains all evidences, analysis results, suggestions recommendations, conclusion, etc This document will pass to the management or the higher level people to review approve and take necessary action if necessary. The report should be clearly written and easy to understand because this document need for future also to give some information to start next auditing or to take some strategic decision. Problem Domain Because of the increased use of university of Greenwich KW116 lab the chances of threats or issues are high and this is the responsibility of the student and the staff to make the lab secure in all aspects. The reason of this project based on KW116 is that is the lab used by the students largely and usually network related or any other lab sessions and happening in this lab so if the lab got any security hole or lack that may affect the student and the staffs. Easiest way to ensure the security level of the lab is auditing. This auditing needs to cover all areas from physical security to network security. Then only this will the perfect audit and the audit can use some standard checklist to make more efficient and to eliminate human made errors such as forgotten, typing mistakes, etc There are so many ways to make sure the security level such as penetration testing and vulnerability testing. These are more specific with attacks and threats and for the general purpose security audit is the suitable one as it will cover all areas of the security. According the reasons given above the general security audit is the most suitable technique to verify the security level of the lab. So the auditing will cover most of the areas of the lab with the aid of standard checklist which is approved by British Standard Institute. Test behind the auditing Physical test Network test Software Test Security Policy test Hardware/Peripherals test Access control test Objectives To evaluate the actual level of security that exists at The University of Greenwich Maritime campus KW116 Lab. Activities plan and schedule the audit Auditing with software tools Analysis audit result Deliverable Detailed audit report with suggestions and recommendation This is the main objective of the project and this will carry on with several tools like packet sniffer, port scanner software, etc There are three different tests using these tools to identify internal and external vulnerabilities. To evaluate various methods of implementing the security policy, determine the security weaknesses and implement risk management for the existing security weaknesses. University lab security policy review Analysis Deliverable Detailed security policy analysis report with changes/suggestions/recommendation. The reason of this objective is to stop the holes from policy level because this is the easy way to implement. Learn Audit and Audit process and practice auditing and Research auditing products available in the market and select appropriate. This task is fully learning about audit and audit related stuffs. This objective is the key or starter of this project because if project start without proper knowledge that will mislead to somewhere else not to project aim. To draft a new security policy that addresses the existing weakness to the management. According to the analysis draft a security policy to fix or overcome all existing security holes. Deliverable Draft security policy How the objectives will be achieved Third and fourth objectives will be achieved with books and internet. This objective will give the idea about auditing the outcome of this objective will be a documentation which contains all requirements which need to cover in this project. The research will give the details about tools which requires to perform the auditing the methods/process for the auditing. Internet is the main and basic mean for this research as it is easy to access and with wide range of data. Tools which identified from the research will used to perform the security auditing and this audit result will monitor in real-time and document instantly. Mostly these tools will be freeware and from well-known vendor. The auditing will perform in three different views to make sure the area is secured fully. The views are inside computer local network, outside computer local network, outside computer different network. Audit Methodology This project uses two different methodologies to accomplish the task such as checklist and questioner. The check list is an aid for the auditor to perform the audit and it is a manual to the audit. So the checklist will contains all tests need to perform during the auditing where questioner is to get the opinion or feedback for the staffs and students (generally this will be feedback from stockholders). The analysis also will carry in two different way using questioner and the checklist and finally compare both and get the conclusion. The questioner and checklist covers most of the areas and those are grouped separately to make the auditors life easy and more understandable. The areas coved in the documents are Physical Security/ E Security Forensics and Risk Management Security Forensics and Risk Management Acknowledgement Foremost I would like say thanks to god for all support in all my life and secondly University of Greenwich to give this my life aim to complete my masters. Next my supervisor Professor Kevin Parrott to the supports he gave because without his support I wouldnt be able to complete my project with this quality. Especially the suggestions and appreciation given my supervisor make me feel better and gave positive thinking. Finally need to thank my family and friends for unbelievable supports and encouragements. Abstract As we are in the information era the world is changing to use electronic means for day to day use. The paper documents is gone and most of them are paper free because of so many reasons such as pollution, easy, fast, etc At the same time this digital media has availability, scalability, confidentiality and integrity which are required behaviour for secure communication. The risk is increased with the increase of computer and digital means usage and the single security lack may cause huge losses. There are some surveys says most of the crimes are happening through electronic means and the target is computer or computer peripherals. If the attacker found a single security lack that is enough to start and break the whole system and the security lack could be configuration mistake, firewall issue and basically problems in the protection mechanism. Because of these reasons testing become very important and this process called as Auditing. There are so many types in the auditing and this auditing requires technical knowledge to make these tests perfect and to give an audit report including suggestions. The auditing falls into two main categories such as Automatic and manual. The test will be efficient if it is automated using testing tools which are called as automated or computerised test. Even though there are some tests cannot be automated and need to test manually. This auditing covers network security test, physical or environment security test, computer security test which includes software and hardware tests. The computerised test will carry on with some security tools and the manual will use questioner to minimise human made errors mainly forgetting.   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Security audit is the technical assessment of the application or system. The assessment may be manual or systematic or both. In most case the auditing process uses manual and systematic/ automatic methods because there are some tests cannot be automatic such as review of the security policy, asset management, etc   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  This auditing has different types such as internal or external. This type is depends on the company size and the resource availability. Usually big companies have their own security auditor so they will perform the audit internally and the small and medium size companies mostly hire auditor form outside. Both types got pros and cons in security and financial manor. Chapter 1 Introduction This chapter largely contains non-technical information to give the understanding of high level objectives. Also describe the techniques and technologies used in the project and research to accomplish the project Objective Audit The audit is a systematic or manual security assessment of the network, infrastructure, system, etc The complete audit should be the combination of manual and automatic assessment because in every test target there will be some test cannot be automatic. The audit has so many categories and the following paragraph will explain about the categories and the functions or techniques behind that. There are 3 controls in the auditing process which are Preventive control The preventive controls are controls may in the form of software or hardware or ant configuration to prevent the error or vulnerabilities. This is an active type control always monitor the interface for any vulnerabilities and block such vulnerabilities or errors before it enter into the system or infrastructure. This is most effective control mechanism because not allows the vulnerabilities. Detective control The detectives are in placed to monitor the vulnerabilities in the form of software or hardware but the different between preventive and detective is the preventive wont allow the vulnerabilities into the system where detective allows entering everything and correcting the vulnerabilities after enter. The best example is for this control is fire alarm because fire alarm wont prevent the fire before but if any fire it will work. Corrective controls The corrective controls are the controls to correct the error or issue before it make any harm. This is very important control for all places even if they have other controls because there are some issues or vulnerabilities cannot detect by the controls if they will come and attack so there should be some control to correct those before loss occur. Addition to that the controls should up to date such as latest firmware or latest definition. Type of auditors   Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  There are two basic types of auditors in the information era the internal and external auditors. This selection of the auditor will be done by the management with the use of financial status of the organisation. Size of the organisation and the policies defined in the company. Internal auditors Internal auditors are auditors belong to that particular company which is going to perform the audit. That means the auditor is an employee of the company. So the auditor is always available to do the auditing and data or information will keep within the organisation. This is the main advantage of having the internal auditor and the same time and the employee purposely recruited for auditing then is cost a lot for the company. So it is only possible for the big level companies because they have huge investments and revenue. The disadvantage of the internal auditor is they may be up-to-date and dont have current market or audit status such as new techniques and tools. External auditors The auditor recruited from other auditing firm for the auditing so it is very hard to find professional auditor because of the availability and as the auditor recruited from outside the company information may go out. At the same time the auditor needs some time to get and understand the company process. But the advantage of recruiting the external auditor is their knowledge and it is suitable for middle and small level companies. Types of Audit: Traditional Audit It is just like a manual auditing. It is useful when working with a large amount of data in a large company. Here auditor took some sample data from different place then provide a report. Advantage: Easy Cheaper Disadvantage: Always do not provide correct information. In IT sector it is not useful. Software audit: Software audit is a wide popular for any educational institute or organization. It is just like a review of the software and the system that can find all information of the system such as operating system, application software, processor, drives, controllers, bus adapters, multimedia, virus protection, system model, main circuit board, memory models, local drive volumes, network drives, printers information etc.. There are so many auditing tools in the market such as Belarc Advisor, E-Z audit that are very power full. KW116 is the main Lab for school of computing and mathematical science in University of Greenwich. CMS installed lots of software for students to continue study or research. According to Copy right, Design and Patents Act 1988, all Software must have a valid licences to continue the process. As Lab uses large amount of software and different software expire on different time so it is very difficult for Lab administrator to keep up to date all licence by manually checks. Only auditing by software can possible to give details report to administrator to keep up safe the system. Advantages: Correct Information: Machine always provide the correct information so it has less chance to provide the incorrect information. Save time: Software very quickly provides a report of the system so it saves time. Details description: It provide a details description of system including any warning or licences issues etc Minimise the cost: By implementing the software audit two peoples work may possible with one people so it reduce the extra cost. Disadvantages: Investment Costly: Software is very expensive so university need extra money to buy this software. Risk: Auditor knows the details information of the system. Work flow: Auditor needs part of the lab to check the system. So it discontinues the student workflow. The approach The typical audit has different approach to collect the data. The single audit will use multiple techniques to gather full information and it is necessary to use different technique for different level of people. These are common techniques here. Interview This technique uses to collect the information from outside people or top level people and the number should be limited. During the interview the auditor or interviewer will ask questions from other people and collect the information. So the person will be well prepared for the interview. This is very robust method because it will allow people to express fully and the method also simple as it is talking which is natural way to communicate. Another advantage is this bi directional communication, means both parties allows to ask questions for clarification or gather information. Observation This method uses in the place where real time process monitoring or behavioural change is required. This is a powerful way of do the changes throughout the audit because other techniques exist in currently not possible to get real time information. Inspection The technique required to do some action with collected data to collect audit related information. This is the form of observation with advance criteria expected. This is extended version of observation because if the auditor apply any advance criteria to gather the data which is necessary to the auditing. After collecting the data the next step is to identify the weakness and process it. The identifying is the key work in the audit and after that categorising. The identifying uses some techniques to make that easy, preface and professional. The techniques used here are Root cause analysis General technique for analyse and get the better solution for the vulnerability or weakness. Because this technique drilldowns to the issue and finds the root and fix the weakness. The basic technique behind this is if the root is fixed automatically it will fix all other problems related to that. So simply close all related issues at once. As mention the easy and robust way to stop the issues exist and the issues may come in the future. After root cause analysis the next step is to get the solution for the root of the issue. The important thing here is choosing better and effective solution for the issue. The selection depends on some external and internal restrictions. Organisation policy Cost per benefit Legal restrictions Availability Compatibility Vendor and citification Advantage of having Auditing: Satisfaction: It brings the confidence of the Lab administrator of the University of Greenwich to continue the business process. Owner always thinks is there any lack that breaks down the continuity of the business. Detection and prevention of errors: Human can made error in any times .on one can say there is no error in there company. By auditing people can find the error and suggestion to recover the error. Detection and prevention of fraud: It also just likes errors. Sometimes user intentionally or unintentionally does this thing. So after audit we can find out the fraud. Verification of the Licences: KW116 Lab installs lots of software for student. Here some software for 1 year some software for more than one year and some software has limitation (No. Of user can use) for use. So auditor can find all kind of licence issues. Independent opinion: Audit always done by the independent people .so this report always accepted by everyone. Safety form exploitation: Health and safety always is a big issue for any organization. KW116 Lab got lots of equipment that are connected with electricity. So always chances for short circuit or exploitation. Audit identifies the all lack point and advice for prevention. Disadvantage of having Auditing: It is expensive Sometimes slow or stop the work flow External people know the company information. Encryption Encryption is the simple technique in the different for to send the date securely through shared place like internet. The form of encryption may vary from each other but they all commonly use digital certificate to encrypt and decrypt the data. Encryption use keys to make cipher text from actual message. The cipher text is not readable and it is the encrypted version of the massage using some algorithm. Security roles/user roles The security roles are very important technique to make network administration easy. This is basically creating some groups with different permissions according to the organisation operation or policy. A user or staff can have multiple security roles according to their need. This roles use to authorise the user permission. Security policy Security policy is a document which has all rules and regulations documented and approved by management and align with laws and legislation. This policy is used to define all activities and this is used to make some decision. Business Continuity: There are three things always we have to mind to continue the business Essential: to running the business any customer order cannot be delay more than seven days. Tolerate delay: some application may delay to continue the business such as management pay. It is a midterm i.e. one to four weeks. Discretionary: some application is useful for business but it is not affected to continue the business operation such as management report. It is a long term i.e. 3 to 6 months. Business continuity planning Business continuity planning (BCP) is the most important for any organization to continue the business. BCP engages with only different kind of risk to continue the business process that might occur in the organization and it also creates the policies, plan and procedures to reduce the risk. BCP can continue the business process in disaster situation as well. The main goal of the BCP is to combine together all policies, procedures and process so that any disruptive situation business process can continue or it may impact very little. Here main important function of BCP is Maintaining the business operation Continue the business in emergency situation Reduce the risk If any situation BCP cannot take over then Disaster recovery planning (DRP) takes over. British Auditing Standard BS7799: It is a British standard called as BS7799 that developed by British standard institution where describes the security policy and standard procedures.BS7799 become the ISO IEC 17799 after accepting the ISO IEC technical committee for international use. Now a days information is a valuable asset for organization .So it is very important to protect the information like other corporate asset. Here BS7799 introduces how to protect the information from threats and suggest the three points to secure the information such as Integrity: it is assurance the completeness and accuracy of the information. Confidentiality: Information can only access by the authorise people Availability: Authorise people can access the information when needed. Attacks and prevention for the attacks Errors and Omissions: Errors and Omission is one of the most common and toughest vulnerabilities .It is a human made error because human interact with programming, controlling and enter data for computer. There are no countermeasures to protect the errors and omission. Fraud and theft: It is a one kind of criminal activities that may occur in the KW116 Lab. It includes computer component such as mouse, keyboard, router, switch, cables, CPU box etc. It was observed that security person always not in the access point. So it is harm to secure the lab from fraud and theft. By protecting the access control we can reduce the fraud and theft. Both internal and external people are responsible for that kind of activities. Prevention of Fraud and theft: Regular auditing and monitoring program will help to identify all kind of fraud and theft. Deploy all of the access control. CCTV in proper place. Virus: Virus is a malicious code that has ability to reproduce his code itself and spread one system to another system via e-mail, downloading, storage devices (CD, DVD, memory stick, removal hard drive) and destroy the computer system. It was observed that removal memory stick all most every user are using and it is the most change to spread the virus in the Lab computer system and also observed user are using their own laptop and connected to the university wireless network. If user laptop effected with virus then it also change to spread the lab network that can affect the internal network and attack the server and crash the hard drive. Prevention: Install the latest antivirus software. Regular update the antivirus software. Follow the backup procedures regularly. Scan the device when transfer data. Installing the NIDS (Network Intrusion detection system) and firewall Minimise the download from internet. Download only repudiated site web site. Scan before the download. Care full to open unknown e-mail attach. Scan all incoming file from the remote site. Aware the user about danger of the virus. Trap-doors: It is an undocumented command that might user can create to speed up the work flow. Unfortunately sometimes student might leave these trap-doors. Prevention of Trap-doors: Use latest antivirus software. Give permission to develop the code only authorise people. Check properly all coding before use it. Logic bombs: It work s like time bombs and affect the system in a particular event or day such as program launch, website logon. It changes the data and deletes the data from the system. Here student are accessing the lots software to do the course work or project. So they are strong enough to build the logic bombs. It is normally happen in company if employee leaves the job. Prevention: Audit regularly and monitoring Always back up the necessary file Allow authorise people to develop the code Need record of all modification or changes Trojan Horses: It is a software programming that contains the malicious code. Normally students are interested to download the music, free software from internet. It is the most change to affect the lab computer and destroy the data stored on lab computer system. Prevention: Avoid unwanted software and music download from internet. Aware the user about Trojan Horses. Worm: Warm also is a malicious code that can spread itself without any human involvement from one system to another system .It works only computer network system and does not need any devices to transport. Prevention: Use firewall Use update antivirus software Spyware: It is an unwanted software interface that monitors the activity of the user and transfers the important information like log in details or account details to the remote system that monitor the user activities. Adware: It is also similar to spyware but it does not intent to transfer the user details to a remote system. It works like advertisements on the internet. Some adware monitor the searching behaviour of the user and then redirect the related websites. Prevention of Adware /Spyware: Close the pop up window. Aware about the spyware/adware. Click only reputed link. Social Engineering: Most of the users are getting unknown mail and they are also chatting with unknown people. Social engineering is one of the most popular techniques that attackers use to access the system by sending the mail or chatting with people to know the password. So it is a major risk to the security of the password. Prevention: Not response the unknown mail. Not chatting with unknown people. Dont give any one personal information or login id. Proper training or aware the new user about social engineering. Ping of death: we have only permission to send the largest packet (65,536 bytes) on the server. Attackers know this amount of bytes from ICMP specification. So they try to send the packets more than 65,536 bytes (at least 65,537). If the server does not check the size of the packet and try to process then it hung or crashed the operating system. Dumpster diving: Every day Lab user printing there necessary document but sometimes by mistake they are printing unnecessary document and end of the day through all document in the bin. Hacker is very intelligence. They always look at the bin and find the necessary document to access the network. Prevention: Destroy all documents before put in a bin Natural disasters: If anything happen that is not under control of human it is called natural dusters such as earthquakes, volcano, floods, fires, storms, hurricanes etc It may occur in any time but most risk is the fire for KW116 lab. It may cause from heater, power supply, over heating the power box, short circuit etc. Natural disaster is less chance for lab but it affect is more than any threat .It may destroy the part of the building, loses the all information. Prevention: Follow the health and safety procedures. Clear the fire exit. Aware the user about possible disaster. Man-Made Disasters: If anything happen intentionally to destroy the business process or destroy the part of the business and it is control of human then it is called the Man-Made Disaster such as Fire, Act of Terrorism, Bombings/Explosions, and Power Outages etc. Prevention: Check always ID card Allow only authorise people Use metal detector CCTV Equipment failure: Students are always busy with their course work and other course related work so equipment failure may loss the all data. Prevention: Use extra UPS Back up all data Auditing Stages/Steps Scope and Pre-Audit survey Planning Field work Analysis Reporting Scope and Pre-Auditing The first step or stage of the audit is to understand the purpose of the audit and the areas need to cover during the audit. Understanding the audit purpose is basically get the idea why this audit needs to perform; means any special risk assessment or annual audit. If it is special risk assessment audit this will be more specific and the scope will be narrow and deep otherwise if it is annual audit it will be the general audit to cover as much as possible area. Pre-Auditing survey is to verify the audit areas using risk management techniques and some general techniques such are reading previous audit report, web browsing, background reading, etc This will reduce the chance of failure by correcting the plan by lesson learned. Planning and Preparation In this stage the scope is going to break into small areas to make auditing easier and clear. So the clarity will be more and purpose will be easy to understand. Usually this stage will involve the work breakdown plan and risk control matrix. The risk control matrix is just a check list contains questions to carry out during the audit. Field work Actual auditing will perform during this stage by different techniques or methods. Simply it starts with interviewing staff or students using questioner or oral interview to system or network test by auditing software tools. The result of this stage will be the evidence of the audit to get a conclusion or submit to the management with audit report. So this will be the most important stage in the audit process. This step may use several testing software tools depend on the scope of the audit and the software selection is another key event of the audit process because there are so many fake software applications available in the market. Actually those are virus and the reason of making virus in the form of auditing tools. The reason of spreading the virus in the form of auditing or testing tool is very easy and hart to detect. Analysis Using the evidences or any results collected in the previous stage are the input of this stage. This stage is fully analysis and decision making so it needs a lots of time to investigation and assessment. The most sensitive area of the audit process is analysis because this is the place going to take the decision to submit to the board so that should be perfect otherwise the audit is useless and it will lead to make some wrong decision. Reporting The stage is to present all audit findings in the form of report. This is the document contains all evidences, analysis results, suggestions recommendations, conclusion, etc This document will pass to the management or the higher level people to review approve and take necessary action if necessary. The report should be clearly written and easy to understand because this document need for future also to give some information to start next auditing or to take some strategic decision. Problem Domain Because of the increased use of university of Greenwich KW116 lab the chances of threats or issues are high and this is the responsibility of the student and the staff to make the lab secure in all aspects. The reason of this project based on KW116 is that is the lab used by the students largely and usually network related or any other lab sessions and happening in this lab so if the lab got any security hole or lack that may affect the student and the staffs. Easiest way to ensure the security level of the lab is auditing. This auditing needs to cover all areas from physical security to network security. Then only this will the perfect audit and the audit can use some standard checklist to make more efficient and to eliminate human made errors such as forgotten, typing mistakes, etc There are so many ways to make sure the security level such as penetration testing and vulnerability testing. These are more specific with attacks and threats and for the general purpose security audit is the suitable one as it will cover all areas of the security. According the reasons given above the general security audit is the most suitable technique to verify the security level of the lab. So the auditing will cover most of the areas of the lab with the aid of standard checklist which is approved by British Standard Institute. Test behind the auditing Physical test Network test Software Test Security Policy test Hardware/Peripherals test Access control test Objectives To evaluate the actual level of security that exists at The University of Greenwich Maritime campus KW116 Lab. Activities plan and schedule the audit Auditing with software tools Analysis audit result Deliverable Detailed audit report with suggestions and recommendation This is the main objective of the project and this will carry on with several tools like packet sniffer, port scanner software, etc There are three different tests using these tools to identify internal and external vulnerabilities. To evaluate various methods of implementing the security policy, determine the security weaknesses and implement risk management for the existing security weaknesses. University lab security policy review Analysis Deliverable Detailed security policy analysis report with changes/suggestions/recommendation. The reason of this objective is to stop the holes from policy level because this is the easy way to implement. Learn Audit and Audit process and practice auditing and Research auditing products available in the market and select appropriate. This task is fully learning about audit and audit related stuffs. This objective is the key or starter of this project because if project start without proper knowledge that will mislead to somewhere else not to project aim. To draft a new security policy that addresses the existing weakness to the management. According to the analysis draft a security policy to fix or overcome all existing security holes. Deliverable Draft security policy How the objectives will be achieved Third and fourth objectives will be achieved with books and internet. This objective will give the idea about auditing the outcome of this objective will be a documentation which contains all requirements which need to cover in this project. The research will give the details about tools which requires to perform the auditing the methods/process for the auditing. Internet is the main and basic mean for this research as it is easy to access and with wide range of data. Tools which identified from the research will used to perform the security auditing and this audit result will monitor in real-time and document instantly. Mostly these tools will be freeware and from well-known vendor. The auditing will perform in three different views to make sure the area is secured fully. The views are inside computer local network, outside computer local network, outside computer different network. Audit Methodology This project uses two different methodologies to accomplish the task such as checklist and questioner. The check list is an aid for the auditor to perform the audit and it is a manual to the audit. So the checklist will contains all tests need to perform during the auditing where questioner is to get the opinion or feedback for the staffs and students (generally this will be feedback from stockholders). The analysis also will carry in two different way using questioner and the checklist and finally compare both and get the conclusion. The questioner and checklist covers most of the areas and those are grouped separately to make the auditors life easy and more understandable. The areas coved in the documents are Physical Security/ E